User
Manual
50
used with wired controller that includes gate control signal detecting
function (used as master and salve wired controller).
5.19 Inquiry of Indoor Temperature with One Button
In the homepage, hold “ENTER” button for 5 seconds, and the
wired controller will display the indoor temperature for 5 seconds.
Within the 5 seconds, it can quit displaying the indoor temperature
immediately and be responded to the instructions as usual after
pressing any buttons.
5.20 Auto Clean Function
In the homepage, hold “MODE” and “TIMER” buttons for 5
seconds to turn on or turn off Auto Clean function. When Auto Clean
function is turned on while the unit has not entered into the Auto
Clean mode, “
” icon is always on; when the unit has entered into
the Auto Clean mode, “
” will be flickering and timer zone will
display the remaining time of Auto Clean mode.
Press “
” button to exit the Auto Clean mode, “
” icon will be
off when the unit has exited the Auto Clean mode. All other buttons
will not be activate when “
” icon is always on or flickering.