11
EN
Parts aND FUNctiONs
(Pic. 1)
OPeratiNG PaNel
(Pic. 2)
1. Paper entry
2. automatic feed sensor
3. cd/plastic card's entry
4. Top casing
5. Operating panel
6. Vent
7. Botton casing
8. door
9. Open-door signalizator
10. Wastebasket
11. Movable casters
1
2
3
4
5
6
7
8
9
Pic. 2
1
2
3
4
5
6
7
8
9
10
11
Pic. 1
1
start indicator
it will lighten up when paper is inserted, and the machine will start to work
automatically.
2
reverse indicator
it will lighten up if the machine is in reverse mode or too much paper is inserted.
The machine will eliminate paper jams.
3
Full-bin indicator
it will lighten up when the box is filled with shreds. after emptying the wasteba-
sket, the machine will automatically return to the stand-by mode.
4
Open-door indicator
it will lighten up when the door is open. and the machine will not work for your
safety.
5
Over-heating indicator
continuous work cannot exceed 60 minutes. after this time the over-heating
indicator will lighten up. allow the shredder to cool for 20 to 30 minutes befor
restarting.
6
stop button
Press this buttonto stop the machine's work.
7
loading indicator
indicates amount of inserted sheets of paper. The inserted amount of sheets exce-
eds indicated maximum amount of sheets, the machine will automatically start to
work in reverse mode
8
reverse button
in case of pressing this button, the machine will work in reverse mode in orde to
eliminate paper jams. The machine overturns for 4 seconds and returns the paper
when pressing reverse button.
9
start button
after this button is pressed, the machine starts to rotate cutting blades. if the
paper is not inserted into the entry within 1 minute, the blades are being stopped
automatically.
© arGO s.a.
www.argo.pl
