Argo PURY BABY Operating Instructions Manual Download Page 7

15

V 05/20

 

LIGHT CONTROL BUTTON  

 

 
Touch the light control button and the light circle will be on and will automatically cycle the color between: blue – cyan – green – 
yellow – orange – red – purple. To hold the desired color press again the light control button. To deactivate the light circle press 
again this button, a buzzer will ring. 
 

 

 

Warning 

 Always pull the air purifier's plug out of the power socket before cleaning it, to prevent electric shocks or 
malfunctions. 
 

 

Warning 

Do not wet or immerse the air purifier in water, as this may cause electric shocks.

 

 
Use a damp and soft cloth to clean the outer surface of the air purifier. 
Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage the surface 
or colour of the casing. 

 

Cleaning the casing 

Use a damp and soft cloth to clean the outer surface of the appliance. 
Do not use excessively hot water, solvents, petrol or other aggressive chemical compounds, talcum powder or brushes: 
these may damage the surface or colour of the casing. 
Remove stains using lukewarm water with a little neutral detergent. 
Do not pour water onto the air purifier to clean it, as this may damage the internal components or cause a short circuit. 
Do not drop any water into machine when clean the air outlet. 
 

Cleaning the filter 

Clean the filter regularly. Do not wash the filter with water, do not use the vaacum cleaner, just gently clean the filter with 
a dry cloth. Sterilize the filter under sunlight regularly.  
 

Replacing the filter 

When the lamp rings keeps flashing in red, the filter should be replaced. Contact a service center. 
 

 
STORAGE 

Ensure the machine is power off and unplugged, gently use a soft cloth and neutral cleanser to clean away any dust or 
debris from the surface of the machine and air inlet/outlet. After the machine is completely dry, put it on a plastic bag and 
place it in a cool and well-ventilated place. 
If the appliance has not be not used for long time, turn on the machine for few minutes from time to time to ensure good 
performance. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

CLEANING AND MAINTENANCE 

Summary of Contents for PURY BABY










Reviews: