Argo PURY BABY Operating Instructions Manual Download Page 6

14

V 05/20

 

 

CONTROL PANEL  

 

 

 
 
 
 

TURNING ON THE PRODUCT  

 
When connect the appliance to the power socket, the buzzer will ring for 1 second, LED lights on the control panel and on the 
light circle will flash for 1 second, then go off. 
 
 

POWER BUTTON

 

 

 
Touch the Power button to turn on or turn off the appliance.  
To turn on the purifier touch the button Power, the buzzer will ring for 1 second to indicate that machine it’s on, the default 
setting is medium wind speed (MID) and the corresponding LED indicator will be on. 
To turn off the purifier touch Power button, the buzzer will ring for 1 second and all lights on control panel will be off.  
 

 

WIND SPEED BUTTON

 

 

 
In the condition of working, touch the wind speed button, the buzzer will ring for one time, press again to adjust the desired wind 
speed among the circulation: SLEEP (low) -> MID (medium) -> HIGH mode with buzzer rings, the corresponding LED 
indicators will be on. 
In SLEEP mode the corresponding LED indicator will be on for 3 seconds, then go off, lights on control panels and light circle 
will be off while the purificator will continue to work in low wind speed (SLEEP). Press any button on control panel to wake up 
the light. 
 
 

TIMER BUTTON

  

 

 
In the condition of working, press the Timer button to set among the circulation (in hours): 2H -> 4H -> 8H -> OFF with buzzer 
rings, and the corresponding LED indicator will be on. Press again Timer button, the Timer indicator will be off and the machine 
will work continuously without Timer. 
After setting the desired switch off time, when the time is up, the purifier will stop to work and lights on control panel will be off.  
Touch Timer button and the lights on control panel and on light circle will be on for 3 seconds, then turn off, touch any button on 
control panel to wake up the light. 
 
 
 
 
 

Timer button 

Wind speed button 

Light control button 

Power button 

Summary of Contents for PURY BABY










Reviews: