© ARGO S.A.
Nasza oferta w internecie: www.argo.pl
HOW TO USE
1. turn the machine on.
2. When the ready light comes on, the machine has warmed up and is ready to laminate.
3. Place the item to be laminated into the laminating sleeve, centering it within the sleeve.
Please make sure your document or picture is position as close to the sealed edge as
possible.
• the laminator does not require the use of a carrier in order to operate.
• the laminator can laminate film from 3.0 mil (75 micron) to 4.0 mil (100 micron). it works
with most types of heat-sealing laminating pouches.
4. insert the sealed edge of the laminating sleeve straight into the CENtER of the lamina-
tor opening.
5. Remove the sleeve from the rear of the machine after it has stopped moving.
6. Some sorts of paper do not laminate evenly, or appear somewhat cloudy in such ca-
ses the lamination can be fed through the machine a second time and the lamination
process repeated.
CARE AND CLEANING
An authorized service representative should perform any serving, other than cleaning and
user maintenance.
- Do not immerse base in water.
- to reduce the risk of fire of electrical shock, do not remove the base. No user serviceable
parts are inside. Repair should be done by an authorized service personnel only.
- Keep your hands and the cord away from hot parts of the appliance during operation.
- Never clean with scouring powders or hard implements.
- Wipe clean with a soft cloth.
SUGGESTED USES
Photographs, Recipe cards, membership cards, Boat license, Fishing license, Hunting
license, Look of hair from baby’s first haircut.
TECHNICAL DATA
Voltage ......................................................................................................... 230V~50 Hz
current ....................................................................................................................... 0.8 A
power max .............................................................................................................. 180 W
pouch thickness ........................................................................................ 75-100 micron
max document Size .................................................................................. 222 x 349 mm
warm up time .......................................................................................... approx. 5 mins
laminating speed ............................................................................. approx. 26.5 cm/min
max Document thickness .................................................................................... 0.4 mm
