15
V 06/19
•
Using extension leads are not recommended as they may overheat
and cause a fire hazard. Never use a single extension lead to
operate multiple appliances.
•
Do not immerse the power cable, plug or any other part of the
appliance in water or other liquids.
•
Do not touch the plug with wet hands.
•
Do not place the fan heater above or near another heat source.
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT
FROM OVERHEATING
.
The symbol below signals this warning:
•
The fan heater may cause the risk of fire if, while operating, it is
covered or comes into contact with
flammable
material including
curtains, drapery, blankets, etc.
KEEP THE FAN HEATER AWAY
FROM THESE MATERIALS
.
•
Do not connect the fan heater to the power supply until it has been
correctly assembled or positioned.
•
Do not run the cable under carpets. Do not cover the cable with
blankets, carpets or similar materials. Place the cable away from
busy areas and where it cannot accidentally be pulled out.
•
Do not operate the fan heater in close proximity to bathtubs,
showers, washbasins or pools.
•
Do not position the fan heater beneath a power socket.
•
Do not operate the appliance outdoors.
•
Upon initial start-up, the fan heater may emit a slight, harmless
smell. This smell is a normal effect of the initial heating up of the
internal heating elements, and should not recur subsequently.
WARNING:
THE ON/OFF SWITCH IS NOT THE ONLY METHOD OF
DISCONNECTING THE MAINS POWER.
ALWAYS UNPLUG THE APPLIANCE DURING MAINTENANCE
OPERATIONS, WHEN MOVING IT OR WHILE IT IS NOT IN USE
.
•
A fan heater contains parts that generate electrical arcs and sparks.
It must not be used in potentially dangerous areas such as those
subject to the risk of fire or explosion, or areas filled with chemical
substances or humidity.
•
Always unplug the appliance when it is not in use.
•
Turn the appliance off if unattended, in order to prevent accidents.
