background image

 

10

V 05/11 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 

CLEANING THE APPLIANCE AND CARRYING OUT MAINTENANCE OPERATIONS

 

 
Use a soft, damp cloth to clean the inner and outer surface of the lamp and a cotton bud to clean the ceramic disc 
positioned at the centre of the nebuliser.  
Do not touch or scratch the ceramic disc with sharp objects. 
Do not use detergents to clean the nebuliser; use a soft cloth and clean water.

  

 

WARNING 

 

CORRECT STORAGE OF THE NEBULISING DIFFUSER

 

Empty the contents of the water tank and allow it to dry thoroughly.  

Place the appliance and instructions into the original box and store in a cool, dry place.  

 

 
 

WARNING 

Always unplug the appliance from the mains supply before cleaning the appliance as electric shocks and 
malfunctions may occur. 

 

Do not use solvents, petrol, xylene, talcum powder or brushes to clean the surface of the lamp as this 
could cause damage to the finish and colour.

 

 

Do not use metal brushes, metal blades, abrasive brushes or talcum powder to clean the nebuliser surface
This could cause the appliance to malfunction.

HOW TO REPLACE THE CERAMIC DISC 

1.  Unplug the appliance from the mains supply and empty the contents of the water tank.  

 

2.  Dry the mist production aperture thoroughly as the disc to be replaced is located here.  

 

3.  Insert the turnkey into the protection mechanism and turn anticlockwise.  

 

4. 

Remove the protection mechanism and take out the worn disc.  

 

 

5.  Remove the protective rubber cover from the new ceramic disc and insert it, taking care to place the front 

side of the disc face up. Replace the protection mechanism and rotate the turnkey clockwise to fasten the 

new disc into place.  

 

IMPORTANT! 

The ceramic disc has a front and rear side and is illustrated in the diagram (front and rear view). 

Ensure that the front side of the disc is positioned face up.  

Before carrying out maintenance operations dry the mist production aperture thoroughly.  
TAKE CARE NOT TO DROP THE CERAMIC DISC!  It is extremely fragile and will break!

 

Ceramic disc specifications: Frequency: 1.7MHz Diameter: 

Φ

16mm o 

Φ

20mm

Ceramic disc

Winding ring

Tool

Sealing Washer

Mist cavity

ceramic disc

Front view

ceramic disc

Rear view

sensor switch

Water level

LED lamp

Rubber tuck

      

 

www.argoclima.com 

Summary of Contents for Aiko






Reviews: