9
V 05/11
OPERATING INSTRUCTIONS
ASSEMBLING THE PARTS PROVIDED
Place the plastic support
Place the RGB LED integrated nebuliser into the space
provided by the plastic support (previously positioned
inside the lamp).
See picture 8 above for the correct assembly procedure.
inside the lamp
HOW THE APPLIANCE WORKS
Fill the water tank with clean water and if desired, a few drops of essential oil ensuring that the nebuliser
sensor is completely covered. Do not exceed the maximum water level as indicated by the silver marker
found on the plastic support.
Use clean water every time the appliance is used in order to guarantee a longer life-span and increased
effectiveness of the nebuliser.
When using distilled water, add salt in order to ensure sufficient electrolytes are present in the water for
the ceramic disc to work effectively.
Attach the power cord to the nebuliser cord which is found at the rear of the appliance.
Insert the power cord into an electric socket ensuring that the mains voltage is matches the voltage
required by the product.
After a short while the appliance will begin to produce a cloud of cold mist which is dispersed into the
surroundings.
The mist is illuminated by the 12 RGB LED integrated nebuliser (6 red and 6 blue) which produces an
array of continually fading and changing colours.
WHAT TO DO IF THE APPLIANCE DOES NOT WORK
If after a few minutes the appliance fails to produce
mist, the water level in the tank has more than likely
fallen below the required minimum.
If the appliance fails to produce mist and the LED light
switches off, there may be a problem with the mains
supply.
If the appliance produces spurts of water rather than
mist, the water in the tank is dirty.
After approximately 3000 hours of operation the
amount of mist produced by the appliance may
decrease.
Add sufficient water to completely cover the
nebuliser sensor.
Ensure the nebuliser cord is not covering the
ceramic dish as this may impede mist production.
Ensure the plug is correctly inserted into the
socket.
Unplug the appliance from the mains supply and
replace the dirty water with clean tap water.
Replace the ceramic disc.
Purchase a replacement ceramic disc and
turnkey necessary to carry out maintenance
operations from an authorised dealer only.
Carefully follow the instructions detailed below.
