Argo AGHP081PH, User Manual, Page: 20 / 42

Operation Instructions
16
Commissioning Parameters Setting
No Full Name Display Name Range Default Remark
1 T-HP max T-HP max 40~55 °C 104~131°C 50/122°C
2 Cool run time Cool run time 1~10min
3min
[2-way valve Off]
5min
[2-way valve On]
3 Heat run time Heat run time 1~10min
3min
[2-way valve Off]
5min
[2-way valve On]
2.4.1 Ctrl. state
[Operation Instructions]
At the commissioning parameter setting page, by touching “
Ctrl. state ”, it can be set to “ T-water out ” or “ T-room ”
[Notes]

When “ Remote sensor ” is set to “ With ”, this setting can be set to “ T-water out ” or “ T-room ”. When “ Remote
sensor ” is set to “ Without ”, this setting can only be set to “ T-water out ”.

This setting will be memorized upon power failure.