Argo Service Manual Engine System
Ontario Drive & Gear Limited. www.odg.com
PH. (519)- 662-2840 FAX (519)- 662-2421
EN-15
2.
Apply blue 242 LOCTITE to the threads of each mounting bolt and install. Torque
to specifications.
3.
Attach the overhead hoist to the front engine hook and lower the power pack into the
vehicle through the engine access opening. The power pack assembly will go in
vertically with the transmission entering the vehicle first. Photo EN-25
EN-24
IMPORTANT
As the power pack is lowered into the vehicle, position yourself inside the drivers
compartment. Lift up on the transmission and align the power pack frame with the
vehicle main frame.
4.
Position the power pack frame on to the lower main frame and install the front
mounting pivot bolt. Be sure to install the square lockwasher to the mountng bolt
head. Photo EN-26. The bolt is installed from left to right when standing at the
front of the vehicle.
5.
Assemble the rear power pack mounting bolt, complete with spacers and
square washers, through the power pack frame. Photo EN-27
EN-26
EN-27
Installing the Engine (Kawasaki FD620D L/C)
EN-25
