Subject to change_RPEX3-06_14054_1en_03/2022
Page 10
www.argo-hytos.com
4.3 Surface protection against corrosion:
4.4 Basic technical parameters
The valve surface is galvanized with 520 h corrosion protection in NSS according to ISO 9227. Surface layer without hexavalent chronium Cr+6.
Parameter
Unit
Value
Nominal valve size
DN 06
Maximum operating pressure at ports P, A, B
bar (PSI)
350 (5080)
Maximum operating pressure at port T
bar PSI)
210 (3050)
Maximum flow volume through the valve
l/min (GPM)
60 (15.9)
Pressure drop
bar
graf ∆p = f (Q)
Fluid temperature range NBR
°C
-30 … +70
Max. switching frequency
1/h
15 000
Switching time ON at
ν
= 32 mm
2
s
-1
ms
AC: 30-40
DC: 30-50
Switching time OFF
ν
= 32 mm
2
s
-1
ms
AC: 30-70
DC: 10-50
Working fluid kinematic viscosity range
mm
2
s
-1
10 to 400
Minimum required working fluid purity
class
21/18/15 ISO 4406
Lifetime
cycles
10
7
Valve weight
with 1 solenoid
kg (lbs)
2.52 (5.56)
with 2 solenoids
kg (lbs)
3.97 (8.75)
Technical Data - Solenoid for use in explosive atmospheres
Voltage type
AC 50 / 60 Hz
DC
Available nominal voltages U
N
V
110, 230
12, 24, 48, 110
Supply voltage fluctuations
±10 % U
N
Available nominal input power
W
10 (18)
Duty cycle
100 % ED
Electrical protection IP according to EN 60529
IP66 / IP68*
Ambient temperature range for each surface temperature class T4, T5, T6
Temperature class
Nominal coil input power
°C
Ambient temperature range
T4 – 135 °C
10 W
-30 … +70
T4 – 135 °C
18 W**
-30 … +60
T5 – 100 °C
10 W
-30 … +55
T6 – 85 °C
10 W
-30 … +45
*IP68 – test conditions: product submerged 1m under water for 1 hour.
**The coil with a nominal input of 18 W is intended only for directional control valves with a pulse-controlled detent spool (2J15) and two solenoids.
4.5 Working fluid
Characteristics
measured at = 32 mm
2
/s (156 SUS)
4.6 Valve characteristics
(1160)
(
0)
174
( 0)
58
(
0)
522
(2900)
(
0)
406
80
160
40
360
0 20 30 40 50 60
(2.6) (5.3) (8.0) (10.6) (13.2) (15.9)
0 10
1
2
3
200
240
280
320
120
(
0)
232
(3 0)
48
(4 0)
64
4
5
5
1, 2, 3, 4
1, 2, 3, 4, 5
(1160)
(
0)
174
( 0)
58
(
0)
522
(2900)
(
0)
406
80
160
40
360
0 20 30 40 50 60
(2.6) (5.3) (8.0) (10.6) (13.2) (15.9)
0 10
200
240
280
320
120
(
0)
232
(3 0)
48
(4 0)
64
6, 7, 8, 9
6, 7, 8, 9
7
8
6
9
1
R30, X30, J15*
2
Z11
3
Y11, N11, V41
4
H11, B71
5
C11
6
H11, H51
7
C51
8
M21
9
A51
Operating limits (p-Q)
Operating pr
essur
e p [bar (PSI)]
Flow Q [l/min (GPM)]
FlowQ [l/min (GPM)]
Please consult our technical department for operating limits not listed here.
*Spool J15 is only available with coil B4 (18 W).
Ambient temp 70 °C (158 °F), voltage U
N
-10 % (24 V DC), power P
N
10 W
Operating pr
essur
ep [bar (PSI)]
The valve is designed for common hydraulic working fluids:
mineral oils of performance classes HM and HV according to ISO 6734-4
non-flammable and difficult to ignite hydraulic fluids according to ISO 12922
environmentally acceptable hydraulic fluids according to ISO 15380
NOTICE:
NBR seal material is not suitable for some working fluid groups, such as the HFD group.
In case of uncertainty, we recommend to perform a test of the mutual tolerance of the seal material and the working fluid.
Summary of Contents for RPEX3-06
