Subject to change · FNA1HV 005_008_016_43622600 · 0421 · EN
Page 7
www.argo-hytos.com
2.6
General safety instructions
›
Observe the valid regulations for accident prevention and environmental protection.
›
Observe the safety regulations and requirements of the country in which the product is used / applied.
›
Only use ARGO-HYTOS products that are in technically perfect condition.
›
Observe all instructions on the product.
›
People who assemble, operate, disassemble or maintain ARGO-HYTOS products may not do so under the influence of alcohol,
other drugs or medications that affect the responsiveness.
›
Only use manufacturer-approved accessories and spare parts, in order to prevent personal danger due to unsuitable
spare parts.
›
Observe the technical data and ambient specifications specified in the product documentation.
›
If unsuitable products are used or installed in safety-relevant applications, unintended operating states may occur in the application,
which can cause personal injury and / or material damage. Therefore only use the product in safety-relevant applications if this use
is explicitly specified and permitted in the product documentation.
›
You may only put the product into operation, when it has been established that the final product (e.g. a machine or system), into
which the ARGO-HYTOS products have been installed, complies with the country-specific regulations, safety regulations and
standards of the application.
2.7
Product and technology related safety instructions
Leaked hydraulic oil
Environmental hazard / risk of slipping.
›
In case of spills, cover the oil-covered surface immediately with an oil-binding medium.
›
Then immediately dispose of the oil-binding medium according to the national environmental regulations.
Ignition hazard
Risk of electrostatic charge by poorly conducting hydraulic fluid.
›
I f the electrical conductivity of the hydraulic fluid is not known, please contact the manufacturer of the
hydraulic fluid.
Risk of burns
Contact temperatures according to DIN EN563 (3) and DIN EN13202 (4) may be exceeded during
operation.
›
Allow the off-line filter unit to cool down before touching it.
CAUTION
