35
5. Assemblaggio
Estrarre con cura il prodotto dal proprio l’imballo* e provvedere alla rimozione dei materiali di protezione prestando
attenzione a non danneggiare le relative parti estetiche e a non forzare cavi e componenti preassemblate.
*La rimozione dall’imballo deve essere eseguita da due persone adulte per garantire l’integrità del prodotto ed evitare il
rischio di incorrere in infortuni e/o schiacciamenti.
Installazione manubrio
Ruotare la forcella sino a posizionarla frontalmente al telaio.
Verificare che l’attacco manubrio sia posizionato frontalmente ed allineato al telaio in attesa di eventuale successivo
intervento di regolazione necessario a seguito di installazione del manubrio ed inserimento della ruota anteriore.
Rimuovere le viti di fissaggio del frontalino presente sull’estremità dell’attacco manubrio ed inserire il manubrio nell’apposito
alloggio in posizione centrale; posizionare il frontalino dell’attacco manubrio precedentemente rimosso nella sua posizione
originaria ed avvitare leggermente le viti di fissaggio per regolare il corretto posizionamento del manubrio. Finalizzare
l’operazione serrando le viti.