Argent Data Systems Tracker4 Manual Download | Manualshive

Page: 20 / 34

background image

Argent Data Systems

18 |

Sets the subnet mask (default is 255.255.255.0).

WIFI GATEWAY <ip addr>

Sets the default gateway.

WIFI HOSTNAME <name>

Sets the network hostname for this device.

WIFI RESET

Resets the WiFi module.

WIFI REINIT

Re-initializes the entire network subsystem.

WIFI LOAD <filename>

Loads a WiFi module firmware update. The WiFi module’s firmware can also be updated with the

latest available version using the UPDATE command. Use WIFI LOAD to manually load a specific

local firmware file.

WIFI MODE <client | ap | direct>

Sets operating mode. CLIENT sets client or STA mode, and requires the device to be connected to

an access point. AP sets Access Point mode, and DIRECT sets WiFi Direct mode.

WIFI GROUP <name>

Sets the network SSID to be used for AP or Direct mode.

WIFI CHANNEL <0-13>

Selects the WiFi channel for AP or Direct mode. Selecting 0 causes the system to perform a scan

and automatically pick the channel with the least interference.

WIFI OFF

Disables the WiFi module.

NSLOOKUP <hostname>

Performs a DNS lookup and returns an IP address.

«
...
18
19
20
21
22
...
»

Summary of Contents for Tracker4



































Reviews:

No comments

Related manuals for Tracker4

Brand: H3C Pages: 29

Brand: CHERUBINI Pages: 16

Brand: DISIBEINT Pages: 4

Brand: CastleNet Pages: 29

KNX-GSM Gateway

Brand: B+B Pages: 19

Brand: Huawei Pages: 28

Ability Cassia X2000

Brand: ABB Pages: 29

Brand: Cooper Lighting Solutions Pages: 8

Brand: Maverick Pages: 21

STHC-B-ISG02DB-03

Brand: daviteq Pages: 25

FieldGate SWG50

Brand: Endress+Hauser Pages: 48

Brand: Technicolor Pages: 103

Brand: ZyXEL Communications Pages: 35

Brand: Bang & Olufsen Pages: 58

hotspot gateway

Brand: Jaze Pages: 102

OfficeConnect 3C100XF

Brand: 3Com Pages: 260

Brand: SmartRG Pages: 8

Brand: 2N Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands