Page 14
ARG-VA30S VoiceAmp® SpeakEasy™ Technical Specifications
Rated Power Output
30 Watts CLASS D
Max SPL @ Rated Power
90dB @ 1 meter
Frequency Response
60 Hz – 18 kHz
Switch Power Supply/Battery Charger
INPUT 100Vac-240Vac, 50/60Hz 1.5A-0.9A
OUTPUT: 18V – 3A
Built-In Battery
14.8V 3000mAh Polymer
Lithium Battery Pack
Dimensions
7-5/8” (W) x 7-1/2” (H) x 6-3/8” (D)
Weight
6 lbs
Inputs/Outputs
Line-IN
Mono 3.5mm jack accepts audio devices that have a line-level output including
MP3 players, iPODS and CD players
Mic-IN
Mono ¼” jack accepts wired low impedance dynamic microphones
USB Player
Supports MPEG audio 1, 2 and 2.5; supports layer 1, 2, and 3
Line-OUT
Mono 3.5mm jack provides line-level audio to secondary powered speaker or audio
devices having a line-In Input jack.
Wireless 900 MHz Transmitters - ARG-TX900BP & ARG-TX900HH
Frequency Range
902 MHz – 928 MHz
Frequency Response
20 Hz – 15 kHz
Output Power
10dBm
Mute
Auto when signal lost
Frequency Space
2MHz
S/N Ratio
80dB
Channel Number
CH01 – CH12
Audio Sampling
32KHz
Modulation
QPSK
Audio Input
Mic-IN/Line-IN (ARG-TX900BP)
Battery
2 X AA, Alkaline Battery (ARG-TX900BP)
3 X AA, Alkaline Battery (ARG-TX900HH)
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
COMPLIANCE
ARG-TX900BP and ARG-TX900HH are authorized by rule under the Low Power Radio Service (47 C.F.R. part 95) and
must not cause harmful interference to TV reception or United States Navy SPASUR installations. You do NOT need
an FCC license to operate this transmitter.
This transmitter may only be used to provide: auditory assistance to persons with disabilities; persons who require
language translation; or persons in educational settings; healthcare service settings; healthcare services to the ill; law
enforcement tracking services under agreement with a law enforcement agency; or automated maritime
telecommunications systems (AMTS) network control communications. Two-way voice communications and all other
uses not mentioned above are expressly prohibited.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
