Audio Resource Group, Inc.
Page 1
www.argaudio.com
PVS CONTROLLER MANUAL
Audio Resource Group
440 Ramsland Ave
P.O. Box 39
Hannaford, ND 58448
888.468.4552
©2012 Audio Resource Group, Inc.
All Rights Reserved
ARG-OM-024
PVS Controller Diagram
1.
Input
Button
(Press to change the input source)
2.
Power
Button
(Press to turn the PVS ON or OFF)
3.
Channel UP
Button
4.
Channel DOWN
Button
5.
Volume UP
Button
6.
Volume DOWN
Button
7.
Back
Button
(Press to go the last channel viewed)
8.
Numbers 0 to 9
(Press to enter channel numbers)
9.
Decimal Button
(Press to select digital sub-channels)
10.
Enter Button
(Press to enter selection)
11.
RJ45 Connector
(Use to connect cable to back of PVS)
12.
3.5mm Stereo Audio Jack
(Use to connect headphones)
The ARG remote controller is designed to be mounted with most makes and models of cardio
equipment. To mount the control unit, first slide the cable ties through the appropriate holes in the
mounting bracket on the underside of the controller: top to bottom if mounting it to a horizontal bar
(Figure 1); side to side if mounting to a vertical bar (Figure 2).
INSTALLING AND MOUNTING THE CONTROLLER:
Figure 1:
Figure 2:
Wrap the cable ties around one of the bars on the equipment in an appropriate position. Take note
how the equipment will be used and make sure the placement of the controller will not interfere with
the function or the range of motion of the equipment.
