23
Define the fan range and operating mode (JP1, SW2, R28, R29)
Regulate SW1 (setpoint set according to the image 27)
Enter the value of the desired setting.
In the supplied equipment with the controller displayed in image 28, the alteration in the flow regulation must be
performed as follows:
- From the home screen, select the setting menu using the ▼ or ▲ keys.
- Press the P key to enter the selected menu.
- Use the ▼ or ▲ arrows to select the setpoint that you want to change (there is a possibility of setting 2 setpoints
and only setpoint 1 is used by default)
- Press the P key to enter the selected setpoint.
- With the arrows ▼ or ▲ select the value of the intended setpoint
- Press the P key to memorize the selected value.
- Press simultaneously the keys ▼ and ▲ to go back to the previous menu, or the necessary times to exit.
Image 26
Image 27
Image 28
Summary of Contents for TTP
Page 30: ...28 BLANK PAGE LEFT PURPOSELY ...
Page 31: ...29 BLANK PAGE LEFT PURPOSELY ...
