arf YAK55M 60CC, Instruction Manual, Page: 50 / 53

8. If you have removed your horizontal stabilizers, install them once again and check all bolts and
connections.
9. Check all control surfaces for secure hinges by performed a slight tug on the control surfaces and
observing if there is any give in the hinges. Check all control rods, ball links, servo screws, etc. for proper
operation and installation.
10. Check your batteries and perform a proper range check once again with the engine off and running.
Be sure all surfaces are moving in the correct direction and the proper amount for your flying setup.
Recommend Accessories
（ （ （ （
Not included
） ） ） ） ： ： ： ：
* KUZA 1x servo tray No. KAG0T01
* KUZA Heavy duty 7075 aluminum Servo Arm
For Futaba servo
（
25T
）：