arf SBACH300 20CC V2, Instruction Manual, Page: 38 / 42

4. Fill your fuel tank making sure your vent line is not plugged or capped. With
the canopy off, this is a good time to check for any fuel leaks.
5. Position the canopy in place and tighten the canopy screws. Be sure to use the
supplied rubber washers under the screw heads.
6. If you have removed your horizontal stabilizers, install them once again and
check all bolts and connections.
7. Check all control surfaces for secure hinges by performed a slight tug on the
control surfaces and observing if there is any give in the hinges. Check all control
rods, ball links, servo screws, etc. for proper operation and installation.
8. Check your batteries and perform a proper range check once again with the
engine off and running. Be sure all surfaces are moving in the correct direction and
the proper amount for your flying setup.