arf SBACH300 20CC V2, Instruction Manual, Page: 14 / 42

Items Required to Complete This Model:
•
1500-1800Watt electric Motor or
20-26CC Gas
•
Appropriate propeller for your
Motor
•
All required engine and exhaust
mounting hardware
•
Ignition battery and switch
•
One quality throttle servo and
appropriate servo arm
•
5-6Pcs high quality metal gear servos or
better for the ailerons and elevators
•
Appropriate servo arms for the above
•
Servo wire extensions. recommends five
12”
•
Two switches with charging jacks for
the Rx
•
Two high quality Rx batteries of
significant capacity to power your
choice of servos.
•
One Receiver of your choice
Shop Supplies/Tools
•
Covering Iron and heat gun
•
Assortment normal hobby tools such as
screwdrivers, hobby knife, drill and
drill bits, pliers, etc.
•
Thick and Thin CA adhesives
•
30 minute Epoxy
•
Isopropyl alcohol
•
Ruler or tape measure
•
Blue thread-lock or equivalent
•