glue as shown below. The picture is for illustration only. Actually, the connection of
the 2 parts needs to be performed in the fuselage after the hinges are connected.
Tail Wheel Installation
1.
Start tail wheel assembly installation.For safety, please remove all screws and
then re-assemble with thread locker.
2.
Drill 2 mm holes on the bottom rear of the fuselage, secure the tailwheel bracket
with the provided screws. For best results, the pivot point of the assembly should
be over the hinge line of the rudder.
Summary of Contents for EXTRA300L
Page 9: ...Scheme C White blue red ...
Page 37: ......