Arf Pets Bark Collar, User Manual

Page: 14 / 26

TTo Pair the Remote Transmitter and Receiver Collar
If your Receiver Collar does not beep when the Tone Button of the Remote
Transmitter is pressed, or if you feel the Receiver Collar is not responding
to the Remote Transmitter, follow these steps to pair:
2. With the Receiver Collar off your pet, turn the Receiver Collar off. Press and hold
1. Place the transmitter into pairing mode by pressing the 1/2 Button
for 3-5 seconds until the Digital Display shows P. Choose Channel for
3. Press and hold the up (+) and down (-) Buttons simultaneously until the
GreenLED flashes rapidly for 5 times on the Receiver Collar, indicating it has learned the
Transmitter ID.
4. Press and hold the 1/2 Button again to complete and exit Pairing.
5.
Press any of the Stimulation/Vibration/Tone Buttons on the transmitter. The Receiver Collar
Step
4
Two Dog System
The system can be used to train 2 dogs. Add another ARF PETS collar receiver, sold separately.
To Add Dog 2
Remote Transmitter
1. Press 1/2 Button and change to the other Channel for Dog 2.
2. Turn on the Receiver Collar for Dog 2, press any Mode Buttons to verify function.
3. If Dog 2 Receiver Collar does not respond. Pairing may be needed. Repeat Steps in To
Pair the Remote Transmitter and Receiver Collar above.
hold the On/Off Button until the Green LED flashes every second on the
Receiver Collar. This continues for 16 seconds, within which pairing
should be completed.
should respond with exact Mode accordingly
, verifying that it is paired with the transmitter.
Dog 1 or Dog 2 by press 1/2 Button again.
14