TEMP LOGGER INFORMATION
Starting up
-
After this information, read the manual on the CD-ROM first.
-
Install the software, please refer to the manual on the CD-ROM!
-
Connect the USB receiver to the computer.
-
Start the program.
-
Insert batteries in the sensors (P. 7).
-
Consult the help function of the software if you have further
questions.
Important information about the Temperature Logger
-
The USB receiver which is connected to the computer receives
the signals coming from the sensors.
-
The temperature sensors transmit their temperature data to the
receiver.
-
Many temperature sensors can be connected to the system at
the same time.
-
Separate sensors for the Temperature Logger are available at
your dealer.
-
We have connected 60 sensors to one single USB receiver
without any problems.
-
The software graphically shows the temperature measurements
of a longer period of time.
-
Extra: Attractive screensaver software showing all sensors.
-
ATTENTION: The sensors are not waterproof!
-
If necessary, please put sensors which are positioned in a moist
location in a waterproof plastic bag.
-
The range of the sensors can vary as a result of environmental
influences.
Depending on the material properties of the surrounding areas,
sensors located inside refrigerator systems may not be able to
communicate with the receiver.
E
N
G
L
I
S
H
