48
1.2. Problems in the temperature sensor module
The receiver receives signals from sensors, but fails to registrate
signals from one sensor in particular.
Potential problems:
-
Batteries are missing or are at a low charging level
-
Reversed polarity of the sensor’s batteries
-
The sensor’s location is outside of the receiver’s reception
range
-
Damage to the sensor (by corroded battery contacts, moisture
or battery leakage)
-
Problems in the radio signal communication
Suggested solutions:
-
Insert fully charged batteries in the sensor and repeat the
communication test (please check the polarisation of the
batteries before inserting!!)
-
Check the battery contacts and remove all corrosion and
moisture effects.
Technical details
Type:
BS-1000LAN
Radio:
ISM 433MHz, Multilogger RF-protocol
USB:
USB 2.0, Multilogger USB-protocol
LAN:
100 Megabit/s (Fast Ethernet)
Supply:
7V DC / 2000mA
RTC battery:
CR2032 3V
Mesurement size: 30 Byte per sensor measurement
Internal memory: 2MB data-flash (about 9 days for
10 sensors, 18 days for 5 sensors, etc.)
Software:
http://www.arexx.com
Extra information and possible updates can be found on www.arexx.com
Further questions can also be put on our forum, see www.arexx.com
E
N
G
L
I
S
H
