CONFIGURING YOUR ROUTER
CONFIGURING YOUR ROUTER
17
4.
CONFIGURING YOUR ROUTER
The NetDSL Manager gives you access to the configuration and
administrative controls for the NetDSL router. Install the NetDSL
Manager software on PCs that you want to give access to these
controls.
There are many ways to configure your router. However, for the
purpose of this Get Started manual, we are going to guide you
through the process of configuring your router for the first time by
using the Windows-based NetDSL Manger, so that you can easily
access the Internet through NetDSL.
If you have difficulties configuring your router, consult the
TROUBLESHOOTING
section of this guide, or the help menu in the
NetDSL Manager, or refer to the FAQs located on ARESCOM’s
website (http://www.arescom.com).
NOTE:
To connect to the Internet after configuration, simply type in a
web address in your browser and hit enter.
IMPORTANT:
You must install the TCP/IP network protocol on the
PCs
before
you install the NetDSL Manager. For more information on
installing and configuring TCP/IP, refer to the instructions in the
section titled “
SOFTWARE INSTALLATION & CONFIGURATION
”.
Load NetDSL Installation Software
Step 1.
Start Windows 95OSR2/98/2000/Me/NT.
Step 2.
Insert
ARESCOM CD
into your CD-ROM drive.
Step 3.
Click
Start
->
Run
->
Browse
.
Step 4.
In the
Look in:
box, select your CD-ROM drive.
Step 5.
Select the
ARESCOM
folder ->
NetDSL
Manager
folder.
Step 6.
Double-click the
Setup.exe
computer icon.
From this point on, the wireless LAN Configuration utility begins to
install.
