Ares AZSQ3300, Owner'S Manual

Page: 19 / 24

19
Problem Diagnosis Cure
The quadcopter lights continue
to flash when the transmitter is
turned on and the quad will not
operate.
1. The quad has failed to pair
with the transmitter.
2. The quad has insufficient
battery power.
1. See the section headed
‘Preparation For Flight’ and
follow steps 2 - 5.
2. Fully charge the LiPo
battery.
The propellers turn but the
quadcopter will not take off.
1. The quad has insufficient
battery power.
2. One or more propeller
blades are damaged or
deformed.
3. Propellers incorrectly
located
1. Fully charge the LiPo
battery.
2. Replace the damaged /
deformed propellers.
3. Check and reposition as
shown on page 8.
The quadcopter shakes in flight. 1. One or more propeller
blades are damaged or
deformed.
1. Replace the damaged /
deformed propellers.
The quadcopter is unstable in
flight and difficult to trim.
1. One or more propeller
blades are damaged or
deformed.
2. One or more of the motors
is faulty.
1. Replace the damaged /
deformed propellers.
2. Replace the faulty motor(s).
The quadcopter is
uncontrollable following a
collision.
1. The gyro may have lost its
settings.
1. Follow the Gyro Calibration
procedure detailed on page
18.
The propellers turn but the
quadcopter will not take-off.
1. The quad has insufficient
battery power..
2. One or more propeller
blades are damaged or
deformed.
3. The propellers are
incorrectly located.
1. Fully charge the LiPo
battery.
2. Replace the damaged /
deformed propellers.
3. Refer to the section entitled
Propeller Identification on
page 18.
Troubleshooting Guide