ARENDAL 1723, Handbook, Page: 32 / 57

Connecting to an A/V-Receiver
For a typical AV Receiver/Processor connection, we recommend using a single RCA (fi g. 1) or XLR cable between the receiver’s
Subwoofer output (SW Out, LFE Out or similar, please refer to your product manual) and connect to the LFE input on the
subwoofer amplifi er. Where an AVR/Processor has two or more subwoofer outputs, only use one to each subwoofer. There is
no advantage in using two outputs into one subwoofer.
SUB CENTER
REAR FRONT
SUB
1 2