ARENDAL 1723, Handbook, Page: 30 / 57

How to connect the subwoofer
Connecting to a stereo setup
Depending on your subwoofer layout, we recommend
two different methods of connecting the subwoofer(s)
for a normal stereo playback system, where there is no
dedicated subwoofer output from the source.
HOW TO CONNECT
Single subwoofer connection
When hooking your subwoofer up to an existing stereo
setup, where there is no dedicated subwoofer output from
your source we recommend that you use both L and R
variable outputs (output level controlled by the amplifi er
volume control) from the source into the subwoofers
amplifi er. This will ensure that the signal is correctly
summed as a mono signal to the subwoofer. If only using
the L or R signal some of the bass may disappear as some
songs have independant bass tracks on the Left and Right
channel causing only one of them to be heard through the
subwoofer instead of a summed mix.
L
PRE-OUT
R
L
PRE-OUT
R +
LOUDSPEAKER
- +
LOUDSPEAKER
-
L
PRE-OUT
R 1
2
L
PRE-OUT
R +
LOUDSPEAKER
- +
LOUDSPEAKER
-
1 2