3/4
USER'S MANUAL
nium body and the stainless steel AISI 316 head.
It is not recommended to install the inground
horizontally on walls, since the LED head is not
equipped with fixing screws and could easily
come out of the flushmounted box. If you wish to
install the fixture on walls, it will be your job to
ensure stable fixing, depending on the type of
structure on which the unit will be installed.
POWER SUPPLY
Disconnect the mains voltage from the system.
The unit does not require an external power
supply; connect the power cable directly to the
230V AC mains voltage, making sure that the
mains voltage and frequency are compatible with
the specifications indicated on the label. Respect
the LNE polarity indicated on the wiring terminals
(colors brown = L, blue = N, yellow / green = E).
It is essential that each unit is correctly earthed
and that the electrical installation complies with all
the good technical and safety standards in force.
The inground cannot be powered by dimmer
control devices, since the internal power supply
could be damaged.
Wiring diagram to power supply
