Arena Luci LC5003 User Manual Download Page 8

8/8

LC5003

WARRANTYCONDITIONS

The unit is guaranteed for 24 months from the

date of purchase against defects in workmanship

or materials that compose it.

This warranty does faults due to incorrect or

improper use of the device.

The warranty is immediately void if the unit has

been tampered with or opened by unauthorized

personnel.

The warranty provides, at the discretion of Arena

Luci, repair or replacement of faulty equipment.

The serial number and model of the device are

required to obtain information or assistance from

the dealer. We invite you to transcribe them in

time: for any request of information or services,

this will result in a quick and effective operation.

CE RULES

The device meets the essential requirements of

the EMC Directive 89/336/EEC, 93/68/EEC,

BT73/23/EEC.

The device complies with the standard EN 5041 9

on the restriction of use of hazardous substances

in electrical and electronic equipment (RoHS) and

meets the requirements of Directive 2002/96/EC

on Waste Electrical and Electronic Equipment

(WEEE).

Warnings

Disposal of Old Electrical & Electronic Equipment

(applicable in the European Union and other

European countries with separate collection

systems).

The product shall not be treated as

household waste but must be handed over to

the applicable collection point for the

recycling of electrical and electronic

equipment. By ensuring this product is

correctly disposed, you will help prevent potential

negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling. The recycling of

materials will help to conserve natural resources. For

more detailed information about recycling of this

product, please contact your city office, your

household waste disposal service or your supplier.

Arena Luci srl

via Svizzera 12/14 - 46042 Castel Goffredo (MN), Italy

Tel. +39 0376 782411 - Fax +39 0376 780973

www.arenaluci.com

[email protected]

Power supply
Driving current
Power
Output
Control
Distance
Material
Colour
Recessed dimension
Dimensions
Weight
Protection
Ambient Temperature
Suitable to be fitted on normally inflammable surfaces
Applied standards

IN: 12V ÷ 24V DC - OUT: 12V ÷ 24V DC
IN: 20A max - OUT: 4 channels x 5A max
4 x 60W max @ 12V - 4 x 120W max @ 24V
3 channels R-G-B - 1 channel white
DMX 512 signal additional output, 3 pin, 4 control channels
Receiving range of optional radio controller: 20 m (free field)
Polycar tempered glass
Interface: white - Remote: black
Standard flush box, 3 modules type 503
Interface: 120x80x30 mm - Remote: 137x39x11 mm
Interface: 0.14 kg - Remote: 0.04 kg (included battery)
IP20
From -20°C to +50°C

TECHNICAL SPECIFICATION

Summary of Contents for LC5003









Reviews: