background image

10/12

AR3333­RGBWA

Channel 

­ 

Green

The  intensity  of  the  green  source  is  linearly 
variable from off to maximum; in particular, for the 
DMX value equal to 0 the source is turned off, for 
intermediate  increasing  values  the  brightness 
gradually  increases,  for  the  value  255  the  green 
source is turned on at maximum intensity.

Channel 

­ 

Blue

The intensity of the blue source is linearly variable 
from  off  to  maximum;  in  particular,  for  the  DMX 
value  equal  to  0  the  source  is  turned  off,  for 
intermediate  increasing  values  the  brightness 
gradually  increases,  for  the  value  255  the  blue 
source is turned on at maximum intensity.

Channel 

­ 

White

The  intensity  of  the  white  source  is  linearly 
variable from off to maximum; in particular, for the 
DMX value equal to 0 the source is turned off, for 
intermediate  increasing  values  the  brightness 
gradually  increases,  for  the  value  255  the  white 
source is turned on at maximum intensity.

Channel 

­ 

Amber

The  intensity  of  the  amber  source  is  linearly 
variable from off to maximum; in particular, for the 
DMX value equal to 0 the source is turned off, for 
intermediate  increasing  values  the  brightness 
gradually  increases,  for  the  value  255  the  amber 
source is turned on at maximum intensity.

Summary of Contents for AR3333--RGBWA













Reviews: