3/4
USER'S MANUAL
OPERATION
The RGB version of the lamp (code LL0291RGB) has 16 preset color combinations, i.e. it is possible to
automatically execute scenes programmed in the unit's internal memory. To modify the scene in execution it is
sufficient to interrupt the supply line for a specified time: in this way the steps stored in the device are
sequentially reproduced one after the other. Connect a normally closed button in series with the lamp power line,
as shown in the diagram above. The lamp keeps the running function in memory when it is turned off.
Press the button for 0.5 seconds and release it to advance the steps.
Press the button for 1.5 seconds and release it to return to step 1.
To facilitate use, even from a distance, and the synchronization of several lamps, it is possible to use the
optional control system with radio control (code LC2041).
The following table shows the automatic functions of color variation.
MAINTENANCE AND PERIODICAL CHECKS
Mechanical parts
Check that the projector is not mechanically damaged.
Clean the projector glass regularly using a soft cloth.
Carefully check the gaskets that ensure resistance to water and dust and, if necessary, contact the service
center for replacement of the deteriorated parts.
Electrical parts
Check the electrical connections, in particular the earthing and the correct insertion of the removable
connectors, press them if necessary and put them back as they were originally.
Check that there is no oxide on the electrical contacts, if necessary remove it using suitable products and tools.
Replacement parts
All spare parts of the equipment can be found at a service center.
