Arec 79068-Auto10 User Manual Download Page 66

Page: 66 / 68

www.tekvox.com

Auto-Tracking Camera

79068-Auto10 User Manual

7.3.5.4 Release Upgrade

This page displays the current MCU, camera firmware, and AF versions. This information is read-only
(cannot be modified).

Update File:

To install a new version, click “Browse” and navigate in the file menu to the upgrade file.

Click “Upgrade” and a dialog box will appear. After the update has been successfully installed, the

device will reboot automatically.

Note:

Make sure that the camera stays connected to power and network for the entire process, or

the update will fail.

7.3.5.5 Restore Factory Defaults

Click the “Restore Factory Defaults” button and choose “Yes” or “No,” as desired, in the pop

-up menu.

After choosing “Yes,” the camer

a will restart with all settings restored to their default values.

7.3.5.6 Reboot

Click “Reboot” and choose “Yes” or “No,” as desired, from the pop

up menu. After choosing “Yes,” the

camera will restart.

7.4 Logout

Click “Logout” to open the Logout popup

. Choose “Yes” or “No,” as desired. Selecting “Yes” will

log out of the menu and return to the User Login page.

Summary of Contents for 79068-Auto10





































































Search results

Summary of Contents for 79068-Auto10

Reviews:

Related manuals for 79068-Auto10

Brands by name

Popular brands

Arec 79068-Auto10, User Manual

Search results

Summary of Contents for 79068-Auto10

Reviews:

Related manuals for 79068-Auto10

Brands by name

Popular brands