User’s M
anual
–
A
REBO
S Gasoline leaf blower and vacuum
12
35
Washer
58
“O” Sealing Washer
36
Starter pope reel
59
Screws M5×30 (2x)
37
Cole spring
60
Screw M5×10 (1x)
38
Volute case
61
Washer M5
39
Screw M5 x 30 (3x)
62
Screw
40
Starter pope
63
Suction pipe
41
Starter handle
5.
Usage
5.1 Starting the machine
Attention:
•
Always switch on the starter motor before starting the engine!
•
Never pull the starter cable to its full length!
•
Always rewind the starter cable slowly!
•
Never operate the machine if the pipes are missing or damaged.
1) Primer pump
2) Fuel line
3) Choke
4) Idling adjustment screw
5.2 Starting with cold engine
•
To start the machine, support it on the ground and hold it firmly. Gently press the primer
pump several times until fuel enters the pump.
Slide the choke closed.
•
Hold the device by the upper bracket with your left hand and grip the pull starter with your
right hand. Pull the pull starter slowly until you feel the motor.
•
Start the machine by quickly pulling the pull starter upwards.
•
If necessary, repeat this step two or three times until the engine is running.
•
Before starting work, allow the machine to warm up for approx. 2-3 minutes at idle.
•
When the engine warms up, gradually open the choke.
•
The machine should now be ready for operation.
5.3 Starting with warm engine:
•
Press the ON/OFF button.
•
Slide the choke open.
