Area Imager IG610/BT, Configuration Manual

Page: 110 / 196

101
first scan I 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2
(single digit numbers must always be preceded by a leading zero).
To correct an error or change the selection, scan Cancel barcode.
y Any Length - Scan this option to decode I 2 of 5 symbols containing
any number of characters within the decoder capability.
Note: Due to the construction of the I 2 of 5 symbology, it is possible for a scan
line covering only a portion of the code to be interpreted as a complete scan,
yielding less data than is encoded in the bar code. To prevent this, select
specific lengths (I 2 of 5 - One Discrete Length - Two Discrete Lengths) for I 2
of 5 applications.
I 2 of 5 - One Discrete Length
I 2 of 5 - Two Discrete Lengths
I 2 of 5 - Length Within Range
I 2 of 5 - Any Length