Ardo WDE 1207X Quick Start Manual Download Page 3

SM1505

GB

CONTINUOUS WASH/DRY CYCLE

RECOMMENDED DRYING TIMES

PROGRAM TABLES

COTTON

Heavily soiled white cotton
fabrics with organic stains.

Sheets, shirts, tablecloths,

towels that are resistant

and heavily soiled.

For shirts, tablecloths,

towels that are resistant

and normally soiled.

White and coloured

fabrics that are resistant

and heavily soiled.

Delicate coloured

fabrics that are lightly soiled.

   SYNTHETICS

Colourfast synthetic fabrics

that are heavily soiled.

Colourfast synthetic fabrics

that are normally soiled.

Delicate coloured synthetic fabrics that

are lightly soiled.

Delicate coloured synthetic fabrics

that are lightly soiled.

COTTON

COTTON

COTTON

COTTON

   SYNTHETICS

   SYNTHETICS

   SYNTHETICS

90

°

60

°

40

°

30

°

60

°

50

°

40

°

30

°

75

°

#

OPTIONAL WITH THE PRE-
WASH BUTTON PRESSED.

# Reference program for power classification.

 

To wash and dry a full load of 7kg.Consumption according to standards EN 50229 Directive

96/60/EC  (First drying cycle 5kg with the drying knob set to 130min. Second drying cycle 2kg with the drying knob set to 60min)

PROGRAMS ENABLED
FOR DRYING

FUNCTION ENABLED

FUNCTION DISABLED

7

FABRIC

COTTON AND LINEN

WASH LOAD

DRYING RESULT

TIME

COTTON AND LINEN

COTTON AND LINEN

COTTON AND LINEN

COTTON AND LINEN

COTTON AND LINEN

SYNTHETICS

SYNTHETICS

5 Kg

Ready to tidy away

130'

5 Kg

Ready to iron

120'

5 Kg

Ready to re-dry

110'

2 Kg

Ready to tidy away

60'

2 Kg

Ready to iron

50'

2 Kg

Ready to re-dry

40'

3 Kg

Ready to tidy away

80'

3 Kg

Ready to iron

60'

WARNING: The times indicated in the table refer to washing spun at the maximum machine speed

for the set program (see table).

Spinning at low speed will reduce the effectiveness of the spin.

The drying times are indicated in minutes on the display. In relation to the type of fabric in question, the drying times
are generally as follows:

PROGRAMMER

KNOB

FABRIC TYPE

Detergent

compartments

BUTTONS ENABLED

Spin speed

WASH

TEMPERATU

RE

LABEL

SYMBOL

Max

Max

Max

Max

Max

800

800

800

800

90

75

60

40

30

60

50

40

30

Pre-wash

Extra rinse

( or lower )

( or lower )

( or lower )

( or lower )

( or lower )

( or lower )

( or lower )

( or lower )

( or lower )

1

Remove any objects from the pockets of clothing items before putting them in the drum,

2

Do not put a plastic detergent container in the drum as this may overheat and melt.

3

Set the drying time using the timer knob.

4

Select the ideal program (the machine will only effect a drying cycle in "Cotton, Synthetic" programs).

5

Press the start/stop button (see "Washing machine operation").

6

To start the machine, press the "Start" button.

7

At the end of the wash and dry program, the "End" led will light up.

8

Press the start/stop button (see "Washing machine operation").

With dry hands, disconnect the power supply cable from the mains.

10 Close the water feed valve.

11 Remove the dry washing

.

Summary of Contents for WDE 1207X















Reviews: