Ardo TL107SA, Instruction Book, Page: 33 / 36

9
SM3187
CONTROL PANEL
EN
ANTI-CREASE: Touch the “ANTI-CREASE” symbol. The appropriate LED will light
up so that the washing machine adjusts the washing parameters to prevent creases,
making ironing easier. At the end of the wash cycle, the drum will move in alternate
way for about 30 minutes. However it can be stopped, at any time, by turning back the
knob to “
OFF” position. The door will unlock and it will be possible to take the laundry.
The spin speed is automatically set at 500 rev/min.
EXTRA RINSE: Touch the “EXTRA RINSE” symbol. The appropriate LED will light up
to enable an additional rinse. This option is recommended if your skin is particularly
sensitive to enzymes in detergents.
This function can be selected based on the program selected (see program table).
TECHNICAL SPECIFICATIONS
Electrical connection
MODEL
Dimensions
Width (cm)
Height (cm)
Depth (cm)
Maximum speed spin (rev/min)
See plate affixed with characteristics
0.05 MPa – 1 MPa
Water pressure
Maximum load
(kg)
40.0
90.0
60.0
1400
8.0
40.0
90.0
60.0
1200
8.0
40.0
90.0
60.0
1000
7.0
TL148SW/A/B/X TL128SW/A/B/X
40.0
90.0
60.0
1000
8.0
TL108SW/A/B/X TL107SW/A/B/X
40.0
90.0
60.0
1200
7.0
TL127SW/A/B/X
START/PAUSE: To confirm your selection and start the wash cycle, press the “START/
PAUSE” symbol. After a couple of seconds, the appropriate LED will light up green,
confirming the start of the cycle. Once the program started, you can pause the cycle
touching the “
START/PAUSE” symbol ­ the LED will blink with a different color. After about
2 minutes since the pause function is enabled, you can open the door to load/empty
any laundry and/or change the washing options selected. For safety reasons, you can
only open the door during the pause function in certain conditions/phases of wash cycle.
EASY LOGIC: The EASY LOGIC system automatically adjusts washing time, water and energy
consumption based on the actual amount of laundry loaded in the machine.
To re­enable the wash cycle, touch for a couple of seconds the “ START/PAUSE”, symbol. The LED will
light up green.
SMART STOP If included, at the end of the wash cycle, the smart stop function positions
the drum correctly making it any easier to remove laundry.
However in particular load conditions, positioning might not be precise and it could be necessary
to turn the drum a bit.