Ardo 33FL105LA, Manual, Page: 9 / 24

9
SM3123
CONTROL PANEL
EN
ANTI-CREASE: Touch the “ANTI-CREASE” symbol. The appropriate LED will light
up so that the washing machine adjusts the washing parameters to prevent creases,
making ironing easier. At the end of the wash cycle, the drum will move in alternate
way for about 30 minutes. However it can be stopped, at any time, by turning back the
knob to “
OFF” position. The door will unlock and it will be possible to take the laundry.
The spin speed is automatically set at 500 rev/min.
EXTRA RINSE: Touch the “EXTRA RINSE” symbol. The appropriate LED will light up
to enable an additional rinse. This option is recommended if your skin is particularly
sensitive to enzymes in detergents.
This function can be selected based on the program selected (see program table).
TECHNICAL SPECIFICATIONS
59.5
85.0
55.0
1200
8.0
59.5
85.0
55.0
1200
7.0
59.5
85.0
39.0
1200
6.0
59.5
85.0
39.0
1000
6.0
59.5
85.0
33.0
1000
5.0
Electrical connection
MODEL
Dimensions
Width (cm)
Height (cm)
Depth (cm)
Maximum speed spin (rev/min)
See plate affixed with characteristics
0.05 MPa – 1 MPa
Water pressure
Maximum load
(kg)
55FL128LW/A/B/X 55FL127LW/A/B/X 39FL126LW/A/B/X39FL106LW/A/B/X 33FL105LW/A/B/X
START/PAUSE: To confirm your selection and start the wash cycle, press the “START/
PAUSE” symbol. After a couple of seconds, the appropriate LED will light up green,
confirming the start of the cycle.
Once the program started, you can pause the cycle touching the “
START/PAUSE”
symbol ­ the LED will blink with a different color.
After about two minutes from the activation of the Pause function, the door can be
EASY LOGIC: The EASY LOGIC system automatically adjusts washing time, water and energy
consumption based on the actual amount of laundry loaded in the machine.
opened to load/unload clothes and/or change the washing options previously selected. The possibility
to open the door during the pause function is possible, for safety reason, only with particular conditions/
washing cycle phase (presence of water in the tank below the minimum safety level, water temperature
in the tank below 50°C).
To re­enable the wash cycle, touch for a couple of seconds the “
START/PAUSE”, symbol. The LED will
light up green.