Ardo 33FL105LA, Manual, Page: 7 / 24

SM3123
7
WASHING GUIDE
Detergent drawer:
1 Prewash
Softener
2 Washing
EN
WASH IN THE CORRECT WAY
Before attempting to operate the washing machine, ensure that the installation has been performed
correctly, as described in the instruction booklet.
Daily use
1. Before putting clothes in the washing machine, empty the pockets of any hard or sharp object (nails,
screws, coins, pins and stones) that may damage the machine and garments.
2. To improve washing performance, introduce laundry into the washing machine without compressing it or
overloading the machine. A whole load of highly absorbent fabrics, such as bathrobes and towels, can
unbalance the machine during the spin cycle. The automatic load balancing system arranges laundry
in the most even manner possible, and sets the optimum spin speed to minimize any vibrations.
3. Close the door making sure that garments are not caught between the seal and the door.
4. Put the correct amount of detergent in the drawer 2. Insert the bulkhead supplied if you are using
liquid detergent. If you want to enable the prewash option, add the detergent in the drawer 1. Use the
drawer marked with the special symbol for the softener. After adding the detergent, gently close
the drawer.
5. Select the wash program most suitable to the type of fabrics by using knob A following the instructions
in the programs table. One of the LEDs on the function bar will light­up to indicate which wash phase
the program will start with. The End LED will light up to indicate the end of the cycle.
6. Pressing the C button, a different spin speed to that provided by the selected program can be set. The
D button allows you to delay the start of the wash cycle up to a maximum of 8 hours. Both values are
indicated by the respective LEDs.
7. Buttons E, F, G allow the selection of supplementary functions. The options selected are indicated by
the relative LEDs. The duration of the wash cycle varies depending on the options enabled.
8. Touch the start button H to start the wash cycle. After a few seconds, the Start LED will stay lit to
indicate that the wash program has started.
9. The “END” icon will light up to indicate the end of the wash cycle. Turn the A knob to the OFF position
and open the door to take all the laundry.
10. The program can be canceled at any time by turning knob A to the OFF position.
11. To shut down the machine in case of emergency, turn the knob pointer to the “OFF” position.
The selection will be confirmed through two sound signals and the shutdown of all LEDs/
LCDs.
Control Panel:
A Program setting knob
B Temperature selection Function
C Spin Function
D Delayed Start Function
E Anti­crease Function
F Prewash function
G Extra rinse Function
H Start/pause Function
I Wash phase icon
L Wash time display