background image

OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS 

Front Tine Models

Page 4

800-45-6007

SAFETY

OWNER’S RESPONSIBIlITY

Accurate assembly and safe and effective use of the rototiller is the 
owner’s responsibility.
•  Read and follow all safety instructions.
•  Carefully follow all assembly instructions.
•  Maintain the tiller according to directions and schedule included 

in this Earthquake operator’s manual.

•  Ensure that anyone who uses the tiller is familiar with all 

controls and safety precautions.

SPECIAl mESSAGES

Your manual contains special messages to bring attention to potential 
safety concerns, machine damage as well as helpful operating and 
servicing information. Please read all the information carefully to avoid 
injury and machine damage.

NOTE: General information is given throughout the manual 
that may help the operator in the operation or service of the 
machine. 

ImPORTANT SAFETY PRECAUTIONS

Please read this section carefully.

 Operate the tiller according to the 

safety instructions and recommendations outlined here and inserted 
throughout the text. Anyone who uses this tiller must read the instruc-
tions and be familiar with the controls. Your tiller is equipped with a 
safety device that enables you to stop the wheels and tines quickly 
in an emergency. Learn how the drive safety control lever operates 
and how to control the tiller at all times.

This  symbol  points  out  important  safety  instructions 
which  if  not  followed  could  endanger  your  personal 
safety. Read and follow all instructions in this manual 
before attempting to operate this equipment.

•  Do not allow children to operate this rototiller. Keep small children away 

from the area being tilled. Do not allow adults to operate the tiller without 
proper instruction.

PREPARATION

•  Dress appropriately when operating the tiller. Always wear sturdy 

footwear. Never wear sandals, sneakers, or open shoes, and never 
operate the tiller with bare feet. Do not wear loose clothing that 
might get caught in moving parts.

•  Carefully inspect the area to be tilled and remove all foreign objects. 

Do not till above underground water lines, gas lines, electric cables, 
or pipes. Do not operate the tiller in soil with large rocks and foreign 
objects which can damage the equipment.

•  Disengage all clutches and leave all control levers in the neutral 

position before starting the engine.

•  Handle fuel with care; it is highly flammable.
  a.  Use an approved fuel container.
  b.  Never add fuel to a running engine or hot engine.

CAUTION

!

CAUTION  INdICATES YOU  CAN  OR YOUR  EQUIP-

mENT  CAN  BE  hURT  IF ThE  SAFETY  INSTRUC-

TIONS  ThAT  FOllOW  ThIS  SIGNAl  WORd  ARE 

NOT OBEYEd.

ImPORTANT

ImPORTANT  INdICATES  hElPFUl  INFORmATION 

FOR  PROPER  ASSEmBlY,  OPERATION,  OR 

mAINTENANCE OF YOUR EQUIPmENT.

WARNING

!

YOU mUST REAd, UNdERSTANd ANd COmPlY WITh 
All SAFETY ANd OPERATING INSTRUCTIONS IN 
ThIS  mANUAl  BEFORE  ATTEmPTING TO  SETUP 
ANd OPERATE YOUR ROTOTIllER.
FAIlURE  TO  COmPlY  WITh  All  SAFETY  ANd 
OPERATING INSTRUCTIONS CAN RESUlT IN lOSS 
OF  mAChINE  CONTROl,  SERIOUS  PERSONAl 
INjURY TO YOU ANd/OR BYSTANdERS, ANd RISk 
OF  EQUIPmENT  ANd  PROPERTY  dAmAGE.  ThE 
TRIANGlE  IN  ThE  TExT  SIGNIFIES  ImPORTANT 
CAUTIONS  OR  WARNINGS  WhICh  mUST  BE 
FOllOWEd.
CAlIFORNIA PROPOSITION 65 WARNING
ENGINE  ExhAUST  FROm  ThIS  PROdUCT 
CONTAINS  ChEmICAlS  kNOWN  TO  ThE  STATE 
OF  CAlIFORNIA  TO  CAUSE  CANCER,  BIRTh 
dEFECTS, OR OThER REPROdUCTIvE hARm.

dANGER

!

dANGER  INdICATES  A  SERIOUS  INjURY  OR  FA-
TAlITY WIll  RESUlT  IF ThE  SAFETY  INSTRUC-
TIONS  ThAT  FOllOW  ThIS  SIGNAl  WORd  ARE 
NOT OBEYEd.

WARNING

!

WARNING INdICATES A SERIOUS INjURY OR FA-
TAlITY COUld RESUlT IF ThE SAFETY INSTRUC-
TIONS  ThAT  FOllOW  ThIS  SIGNAl  WORd  ARE 
NOT OBEYEd.

Summary of Contents for Earthquake 3355H

























Reviews: