33
② Install three batteries first, press and hold the Reset Button
on one hand and install the fourth battery. You should see the
Red LED come up and start flashing (Hardware Reset Mode).
Release the Reset Button once you have entered the Hardware
Reset Mode and press button again for 2 seconds to allow
EZlock to erase all Key records from the system.
③ The LED indicator will be in Orange after the Hardware Reset
is done. If the hardware reset fail, it will enter the self-testing
mode (i.e. continues beeping sound). In this case, please
remove the battery and try it again.
Tips: After hardware reset, turn “Lock Turn-Piece” few times. If
Reset
Button
R/L door
switch
Fig-20
Summary of Contents for EZlock
