EN
15
•
Set the operation mode switch (4) into the necessary position:
- I – minimum heating power (1250 W),
- II – maximum heating power (2000 W).
When the desired room temperature has been reached, the thermostat knob (5)
should be turned slowly anti-clockwise until the thermostat is heard to click off
and the lights on the element switches are seen to go out. After this the heater
will keep the air temperature in the room at the set temperature by switching on
and off automatically.
After using the device, set the switch (4) to the «0» position, then unplug the
device.
Notes:
While the first switching on the heating element burns, therefore occurrence of a
small amount of smoke or foreign smell is possible. It is normal, after some time
the smoke and smell will disappear. It is recommended to ventilate the room.
Do not open windows and doors when the device is operating; otherwise you will
not get the desired results, due to cold air inflow.
OVERHEATING PROTECTION FUNCTION
The overheating protection system automatically turns off the heater if the device
overheats. When the protection system is activated, the light indicator will turn
off. The heater will be ready for operation again after a short cooling phase (about
15 minutes).
Summary of Contents for CHH-2000MBR
Page 24: ......
