EN
12
Due to the continuous umprovement of the product, there
can be made changes in the design of the product that are
not reflected in this manual without reducing its consumer
properties.
GENERAL INSTRUCTIONS
The convector is intended only for additional heating of rooms, it is not meant
for operation as a main heating device.
The convector is installed on the floor on supporting legs.
When buying a convector, require a check of its operability, compliance of the
delivery set with the “Package contents” section of this manual, and the absence
of mechanical damage. Check the availability of warranty card, completeness
and correctness of its filling. The convector model should comply with the
data indicated in the warranty card. The warranty card is valid only if there is
correctly and legibly specified sales data, clear seals of the seller.
After filling out the warranty card, it is not allowed to make any amendments,
additions, delete and rewrite the data added by the seller.
Keep the cashier’s check, this manual, warranty card and packaging during
the warranty period of the convector. Lost documentation attached to the
convector upon sale is not restored.
REMEMBER: if you fail to comply with the above recommendations or if there
is mechanical damage to the convector, you lose the right to warranty service.
IT IS NOT ALLOWED TO:
• Place the heater directly under the outlet.
• Partially or complety cover, clog holes in the intake and
exhaust grids.
• Place flammable substances and objects near the
convector.
• Use convectors in the immediate vicinity of the bathtub,
shower or swimming pool.
• Touch the plug of the power cord and the convector with
wet hands.
• Do not use the device outdoors or on wet surfaces.
• Do not use the heater surface for drying wet clothes,
towels etc.
Summary of Contents for CHH-2000MBR
Page 24: ......
