ARDES AR4A12, Instructions For Use Manual

Page: 7 / 24

7 / 24
Disconnect the unit from the power supply during
cleaning operations.
ATTENTION : read this booklet carefully it contains important instructions for a safe
installation, use and maintenance.
Important instructions to be kept for future reference.
Keep handy the guarantee, receipt of payment and these instructions for future use and
reference.
After removing the packaging, check the appliance for any signs of damage.
In case of visible damage, do not use it and contact a qualified technician.
Do not leave parts of the packaging within the reach of children.This appliance is not a
children’s toy: it is an electrical device and must be treated with the necessary caution.
Before connecting the appliance, make sure that the power supply voltage matches the
indication on the data plate.
If the plug and socket are not compatible, the socket has to be replaced with a suitable type
by skilled persons.
Do not use adapters or extension cables which do not meet current safety standards or that
exceed the current carrying capacity limits.
When you don’t use the appliance disconnect it from the power supply and assure that the
interruptor is off.
Do not tug on the power cable or on the appliance itself to remove the plug from the socket.
The use of any electrical appliance requires that a number of basic rulesare observed,
namely:
- Never touch the appliance with wet or humid hands.
- Do not use the appliance when barefoot.
- Do not leave the appliance exposed to weathering (rain, sunlight).
- Do not subject it to rough handling.
The appliance has been designed and manufactured to operate in the home as ASH
VACUUM CLEANER. Any other use is considered inappropriate and dangerous.
Do not use the appliance out of doors.
In case of a breakdown or malfunctioning of the appliance, disconnect it at once.
Do not attempt to repair it, but take it to a service centre approved by the manufacturer.
If you decide you do not want to use this appliance any longer, disable it by cutting the power
cable - of course, after disconnecting it from the socket.
The power cable should be extended to its full lenght to avoid over heating.
For safety reasons, the appliance should never be opened.
Place the appliance on a fiat surface during use.
USER INSTRUCTIONS
(see figure at the end of the booklet)
1 - Handle
2 – Connection for BLOW function
3 – Top cover
4 – Locking clip
5 – Container
6 – Rigid aluminium pipe 7 – Flexible metal hose
8 – Connection for SUCTION function
9 – Container cover
10 – Switch
11 – Washable fabric filter
1. Install the fabric filter (11) inside the container (5), making sure that the filter ring is well
attached to the edge of the container.
Note – the filter must be removed and cleaned after each use.