5.4 POWER-IN
Use the supplied power adapter to connect this DVR to a power outlet.
Note before operation
1. The DVR does not support HDD hot swap function. To prevent damage,
please enter main menu to stop all HDD activities, then power-off the
device before replacing the hard disk.
2. When the hard disk information icon turns to red, the device is notifying
the user to replace a new hard disk.
3. After power-on, system auto detects the video system (NTSC/ PAL) of the
first camera connected. When no camera has been connected, the video
system will be the same as previous setup.
4. After power-on the system auto enters 9-split screen mode, and previously
setup schedule recording mode.
10
