18
The cooling system
The vaporiser is built into the shelves of the inner container. They will be approx -40°C (ULUF60/120/400/
Always use thermal gloves when touching the contents of the freezer.
The condenser is placed on top of the cabinet behind the control panel.
Thermostat with digital display: once the freezer is cooled down, the set temperature and the temperature
shown will be the same.
CO2 back up
4 x port holes are prepared for CO2 back up, and an injection tube (see separate enclosure) can be inserted
from the top of the unit (remove kit). Make sure that pressurized CO2 escape from the gaskets or pressure
valve.
Relocating or moving the freezer
Never leave the freezer to others without instructing these people in its use and the safety regulations
described in the operating instructions. Always let an authorised electrician install the freezer.
If the freezer and its electrical parts are reconstructed, the guarantee and safety regulations shall cease to
apply.
If the freezer does not work: call an authorised servicing engineer!
Contact the distributor or an authorised service repair shop!
500/700/800), -86°C (ULUF15/65/125/450/550/750/850), -90°C (ULUF490/590/890), so there is a risk of
frostbite if they are touched.