the control panel based on operation manual inside of cabinet.
CAUTION
Setting the temperature control to the coldest setting may cause the evaporator coil to freeze
and ice up. This will eventually result in a warmer cabinet temperature.
LOADING PRODUCT
Shelves have been factory-installed for your convenience. Before loading shelves, please be
sure that all shelf clips are completely fastened in their correct locations. It is important that all
shelves rest completely level before stocking your cabinet with product.
In order to maintain correct air flow inside the unit, please be sure to leave 50 mm to 100 mm
of space between the back wall and stored product. Blocking the evaporator fans will result in a
warmer cabinet temperature, and ultimately compressor failure.
DEFROST SYSTEMS
Refrigerator coils are kept below the freezing point (0 C). During compressor down-time, the
evaporator fan continues to circulate air through the evaporator coil. This air circulation raises
the coil temperature above the freezing point, melting any accumulated frost. Run-off water is
drained into the evaporator pan and evaporated.
PLEASE NOTE: Excessive door openings should be avoided in order to maintain cabinet
temperature and to eliminate the possibility of coil freeze-up.
SAFETY / WARNING
Please pay close attention to the safety notices in this section.
Disregarding these notices may lead to serious injury and/or damage to the
unit.
ATTENTION
■
To minimize shock and fire hazards, be sure not to overload outlet. Please designate one
outlet for your unit.
■
Do not use extension cords.
■
Do not put your hands under the unit when the unit is required to be moved.
■
When the unit is not in use for a long period of time, please unplug the unit from the outlet.
