Arctic APL61025XLW4, User Manual, Page: 48 / 60

48 / EN
Washing Machine / User’s Manual
4.3.10.1 Auxiliary functions
•
Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
C
INFORMATION
• Prewash without detergent is recommended for tulle and curtains.
• Fast+
When this function is selected, durations of relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption, high washing
performance is achieved in spite of the reduced duration.
• Extra Rinse
This function enables the machine to carry out another rinsing cycle in addition to the one carried out after
the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal
detergent remnants on the laundrwy can be reduced.
4.3.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds
• Drum Clean
To select this programme, press and hold the auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean the drum and ensure the required hygiene is provided. Run the
programme while the machine is totally empty. To obtain better results, put powder lime-scale remover for washing
machines into the detergent compartment no. “2”. When the programme is over, leave the loading door ajar so that
the inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme. It is a maintenance programme.
• Do not run this programme when there are any objects in the machine. If you try to do so,
the machine will automatically detect that there is load inside and abort the programme.
• Child Lock
You can prevent children from tampering with the machine by using the Child Lock feature. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• If the Programme Selection knob is turned when the Child Lock is enabled, "Con"
appears on the display. While the Child Lock is enabled, you cannot make any change in
the programmes, the selected temperature, the speed or the auxiliary functions.
• Even if another programme is selected with the Programme Selection knob while the
Child Lock is enabled, previously selected programme will continue running.
To enable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds. While you’re holding the button pressed for 3
seconds, C03, C02 and C01 will be displayed respectively.Then, “Con” will be displayed to warn the user that
child lock is enabled.If you press any button or turn the Programme Selection knob while the Child Lock is
enabled, the same warning will be displayed.