Arctic APL61025XLW4, User Manual, Page: 47 / 60

47 EN
Washing Machine / User’s Manual
4.3.8 Temperature selection
Whenever a new programme is selected, the recommended temperature for the selected programme appears on the
temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually.
When the cold level is selected, temperature level lights will not be on.
C
INFORMATION
• If the programme has not reached the heating step, you can change the temperature
without switching the machine to Pause mode.
4.3.9 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then, depending
on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. When the “No Spin” function is
selected, rinse level indicator lights will not be on.
Rinse hold
If you are not going to unload your clothes immediately after the programme ends, you can use rinse hold function to
keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in
the machine. Press Start/Pause button after this process if you want to drain the water without spinning your laundry.
Programme will resume where it left off, drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause button. Programme will
resume. Water will be drained, laundry will be spun and the programme will end.
C
INFORMATION
• If the programme has not reached the spin step, you can change the spin speed without
switching the machine to Pause mode.
4.3.10 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. You can also select or cancel auxiliary
functions suitable for the running programme without pressing the Start/Pause button while the machine is
operating. To do this, the machine must be in a step before the auxiliary function you are going to select or
cancel. If the auxiliary function cannot be selected or cancelled, light of the relevant function will flash 3 times
to warn the user.
C
INFORMATION
• If a second auxiliary function conflicting with the first one is selected before starting the
machine, the function selected first will be cancelled and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible with the programme cannot be selected.
(See "Programme and consumption table")
• Auxiliary Function buttons may vary according to the model of the machine.