0744-922
2. Pull all slack from the throttle cable wire and exert
slight tension on the wire.
3. Tighten the throttle cable jam nuts.
Speed Control Screw
0744-949
The maximum speed of the snowmobile can be reduced
by adjusting the speed control screw.
To reduce the maximum speed, rotate the speed control
screw clockwise. DO NOT EVER INCREASE THE
MAXIMUM SPEED BEYOND THE ORIGINAL 8
MPH MAXIMUM.
Throttle Cable
REMOVING AND INSPECTING
1. Remove the C-clip securing the lever pin in the throt-
tle lever; then remove the pin and the lever.
A979
2. Disconnect the throttle cable from the lever; then
slide the cable out of the lever.
A980
3. Remove the C-clip securing the cable in the throttle
control; then remove the cable from the throttle con-
trol.
A981
A982
4. Remove the handlebar pad and cut the cable tie secur-
ing the throttle cable to the steering post.
! WARNING
DO NOT operate the snowmobile when any component
in the throttle system is damaged, frayed, kinked, worn,
or improperly adjusted. If the snowmobile is operated
when the throttle system is not functioning properly,
personal injury could result.
